Our Best Offer for the best waterproofing material is PROTEC by Profeta Liquido

DESCRIPTION
Elastic coating acrylic-styrene-based copolymers in watery emulsion that once dry will become a flexible and durable waterproofing coating.

Using our reinforcements S-25 and SURMAT it complies with norm nº 53410 of flexible sheets of “in situ” application composed of copolymers in watery dispersion with reinforcement for waterproofing in construction.

Without the reinforcement PROTEC™ complies with UNE norm nº 53413 “Flexible coating copolymers-based in watery dispersion, without reinforcement for waterproofing “in situ” in construction”. It is applicable in vertical surfaces.

Roof with white PROTEC Roof with red PROTEC

Roof with white PROTEC	Roof with red PROTEC

CHARACTERISTICS
PROTEC™ is a liquid cold-applied coating that once dried forms a waterproofing membrane adhered to the surface that perfectly takes onto its forms and shapes. The coating is completely elastic and resistant to any weather condition and to most chemicals.

APPLICATIONS:

Waterproofing of any kind of surfaces, either in construction or restoration of old ones, with concrete foundation, tiling, stone, fibrous concrete, asphalt, bituminous products in general, aluminum, etc.
Protection of mutual walls against water rundowns.
Vertical surfaces, canalages and zinc conduits.
Patching of joints and fissures.
Restoration of tiled roofs.
Waterproofing of chimney corners.
ADVANTAGES:

Impervious
High elasticity
Water based, neither toxic nor flammable
Excellent adhesion to most supports: to any finish of bituminous membrane, to concrete, mortar, fibrous cement, brick, roof-tile, steel, zinc, aluminum, slate, stone, etc.
Excellent penetration in cracks and fissures. It is resistant to micro-fissuration.
Layers that accommodate substrate movements of contraction and dilatation without tearing.
Easy liquid cold-application by traditional methods
Great durability exposed outdoors
Withstands foot traffic areas.
PRECAUTIONS:

PROTEC™ is sensitive to cold temperatures prior to drying, therefore it should never be applied at temperatures lower than +5OC, or if there was any risk of frost prior to the complete drying of the applied product. It should also be avoided its application when it is foggy or if it is going to rain.
Santa María del Pilar College in Zaragoza (Spain)

TECHNICAL DATA Density at 25ºC: 1.20 aprox. BROOKFIELD Viscosity at 25ºC with RV-6 at 2.5 r.p.m.: 80,000 c.p.s. Solids by weight at 105º C: 60% Traction resistance, minimum: 24.0 Kg./cm2 Elongation without breaking, minimum: 291.00% Bending without cracking, up to: -15º C Resistance to percussion, minimum: 700.00 mm. Accelerated aging at 70º C during 1,000 hours with UV rays and water immersion alternatively, loss of elongation, maximum: 12.72% Thermal aging at 70º C during 336 hours Mass loss: 6.20% Elongation loss: 24.75%

For Advertise Your Waterproofing material here please contact us now